Temperature
Alternative temperature measurement solutions.
Temperature Products
21 products available in this category
WGE Series
The wedge flowmeter WGE Series is a fluid metering device for inline installation able to manage an accurate and repeatable fluid measurement. It is based on the proven technology of differential pressure principle; it can work as bi-directional unit so that reversing the mounting it is possible to double the working life. The instrument WGE can be supplied from machined barstock and it?s suitable for Oil & Gas in upstream, midstream and downstream applications. Its housing is dust and sand tight, protected against sea wave effects as defined by IEC IP67, and suitable for tropical climate operation as defined by DIN 50015. WGE is not sensitive to vibrations and entrained gas. It shows a high resistance to wear and the installation is easy and fast.
VCM Series
The Valcom Connectors VCM are two series of connectors designed to meet the operational requirements of the ATEX Directive. Although the two models of the VCM series are equipped with identical insertion devices and other similar components, the two series differ in the coupling type: threaded or bayonet.
THP Series
Pneumatic transmitters THP series are designed in order to measure pipe pressures with dense, viscous and polymerizing liquids as paper pulp, cement muds, rubber latex and other various type chemical products. Process connection can be realized by using different configurations as flange, welding ring, screwed or clamp.
T7W Series
T7W is an online water determination transmitter in crude oil pipes. It is suitable for extreme pressure and temperature process conditions and it is equipped with microcontroller digital electronic which allows a very accurate and reliable management of the capacitive sensor, also giving diagnostic information about the transmitter functioning. It has a standard 4-20mA analog output and is fully managed remotely through the standard HART® communication protocol (“Highway Addressable Remote Transducer”). Temperature compensated.
T7V Series
T7V series includes 4 ? 20 mA loop powered field digital indicators for ATEX Ex ia or Ex n applications and non ATEX application. Configuration and calibration are performed locally through the use of the buttons and the display. All of the standard industrial and marine field measuring units are available (level, ullage, volume, pressure, flow, temperature, density, consistency etc. and user-defined units inserted by display).
T7T Series
T7T series are Smart electronic transmitters with 4 ÷ 20 mA output and HART® digital communication protocol. Configurations and adjustments can be made locally by means of push buttons and display or remotely using HART® protocol compatible communicators. The transmitters are intended for direct mounting on pipe or tank with or without thermowell. For remote sensor version are supplied a bracket for wall or for 2” stand pipe mounting is also supplied.
T7S Series
T7S series are Smart electronic transmitters with 4 ÷ 20 mA output and HART® digital communication protocol. Sensors are always calibrated individually together with their own seal. These transmitters allow the measurement of specific gravity of fluids as liquids or cement slurry. The instrument gives the specific gravity value of the product by measuring the static differential pressure between the two seals (Δp)and applying the formula ρ=Δp/d where “ρ” is the specific gravity, “Δp” is the differential pressure and “d” is the distance between the two seals. Configurations and adjustments can be made locally by means of push buttons and display or remotely using HART® protocol compatible communicators. A bracket for wall or for 2” stand pipe mounting is also supplied.
T7I Series
T7I series includes SMART electronic transmitters with 4÷20 mA output and HART® digital communication protocol. Sensors are calibrated individually together with their own seal.
SPG (Self Powered Level Gauge) Series
Tank gauges SPG series are available with stainless steel wetted parts for all liquid applications compatible with AISI 316 stainless steel. Mounting of the sensor, internally or externally of the tank, meet practically all installation requirements. The SPG Self Powered Gauges have been designed for Marine and Industrial applications. They are completely autonomous and provide remote continuous indication of tank contents. Indicators are of stainless steel construction. Calibration in unit of volume or depth of liquid. Each scale is individually calibrated and painted.
M5 Series
Three ways and five valves manifolds M5 series are used to isolate the instrument from the plant in order to put in place maintenance operations.
M3 Series
Three ways and three valves manifolds M3 series are used to isolate the instrument from the plant in order to put in place maintenance operations.[:it]I manifold della serie M3 sono collettori a tre vie e tre valvole utilizzati per isolare lo strumento di misura dall?impianto in modo da mettere in atto operazioni di manutenzione.[:]
M2 Series
Two ways and two valves manifolds M2 series are used to isolate the instrument from the plant in order to put in place maintenance operations.
M1 Series
Two ways and one valve manifolds M1 series are used to isolate the instrument from the plant in order to put in place maintenance operations.
JBX Series
JBX series includes IP68 Junction boxes with reference to atmosphere and Gore protection filter. Commonly used in general industrial applications and in water industry, they are a very useful instrument in design & project layout, as well as field installation, because they allow a better standardization of the to be installed instruments cables length. This effectively impact on installation costs and allow, in the time, a more manageable instrumentation maintenance.
L30M-D1
The TM10 Series is a three-way globe-style control valve for applications requiring mixing flow in a process control system. The open flow paths and simple construction provide a reliable and easy–to-maintain valve solution. TM10 series could be manufactured with pneumatic or electric actuators to meet all specific requirements of fluid control (water, steam, thermal oil, gas and other liquids) whether compatible with the material used.
L30D-D1
The L30D-D1 Series is a three-way globe-style control valve for applications requiring diverting flow in a process control system. The open flow paths and simple construction provide a reliable and easy–to-maintain valve solution. L30D-D1 series could be manufactured with pneumatic or electric actuators to meet all specific requirements of fluid control (water, steam, thermal oil, gas and other liquids) whether compatible with the material used.
L20-D3
Manufactured under ISO 9001 quality assurance system, the L20-D3 series is a top entry globe valve style body construction with a wide range of different single stage trims available. L20-D3 series combine the advanced modular design and the wide range of actuators to satisfy the needs of the industrial demand. L20-D3 valves are designed to control a broad variety of fluids, like steam, water, most of the medium and gases. One of the main features of this serie is the top guided construction that assure a stable plug travel over entire stroke of the valve minimizing vibration and wear.
L20-D2
Manufactured under ISO 9001 quality assurance system, the L20-D2 series is a top entry globe valve style body construction with a wide range of different single stage trims available. L20-D2 series combine the advanced modular design and the wide range of actuators to satisfy the needs of the industrial demand. L20-D2 valves are designed to control a broad variety of fluids, like steam, water, most of the medium and gases. One of the main features of this serie is the top guided construction that assure a stable plug travel over entire stroke of the valve minimizing vibration and wear.
L20-D1
The L20-D1 single seated control valves are equipped of two-way body with in-line straight connections. The L20-D1 valves has been designed to assure an accurate control in any process condition. Their wide application ranges allows to use the L20-D1 with the most common process fluids such as water, superheated water, steam, air gas and other fluids.
L20-A2
Manufactured under ISO 9001 quality assurance system, the MEC-RELA L20-A2 series is a top entry globe valve style body construction with a wide range of different single stage trims available. L20-A2 series combine the advanced modular design and the wide range of actuators to satisfy the needs of the industrial demand. L20-A2 valves are designed to control a broad variety of fluids, like steam, water, most of the medium and gases. One of the main features of this series is the top guided construction that assure a stable plug travel over entire stroke of the valve minimizing vibration and wear.
L20-A1
Manufactured under ISO 9001 quality assurance system, the L20-A1 series is a top entry globe valve style body construction with a wide range of different single stage trims available. L20-A1 series combine the advanced modular design and the wide range of actuators to satisfy the needs of the industrial demand. L20-A1 valves are designed to control a broad variety of fluids, like steam, water, most of the medium and gases. One of the main features of this serie is the top guided construction that assure a stable plug travel over entire stroke of the valve minimizing vibration and wear.
Need technical assistance?
Our engineers can help you select the right temperature for your application.